SMC MB-Z Series Tie-Rod Cylinder. Double Acting, Single Rod, MDBB80-250Z Insulated Nippers due to contact seal Speed

due to contact seal   Speed capability  Good Good Limited by contact seals  Grease-sealing effectiveness  Good Better than ZZ type  Slightly better than VV type  Dust resistance Good Better than ZZ type (usable in moderately dusty environments) Best (usable even in very dusty environments)  Water resistance Not suitable Not suitable Good (usable even if fluid is splashed on bearing)   Operating temperature –10 to +110 °C –10 to +110 °C –10 to +110 °C   Note (1) The above temperature range applies to standard bearings

4 7500 　 14

RACK LENGTH : 120mm (4

air cushion rocking support bracket N rocking support bracket rod end bracket - no metal fittings auto switch - Without auto switch Auto switch additional symbol - 2 with or without Custom made specifications - standard

5118 in Outside Diameter 210 mm

SMC MB-Z Series Tie-Rod Cylinder. Double Acting, Single Rod, MDBB80-250Z Insulated Nippers due to contact seal SpeedOVERVIEW Maximum weight reduced by 10% by changing the shape of the cover Set the rod end bracket and swing support bracket attached part number (reducing the trouble of ordering separately) Attach auto switch (MDB Z series: MDB, MDBW, MDBK, MDBKW, MDBB, MDBQ) Specification item model symbol Specification information With auto switch D With auto switch installation support B Basic type tube inner diameter 80 Tube inner diameter 80mm Types of port