West System 206A Slow Hardener 0.2kg Rule Slimline Pumps and Inflator Accepts lines up to 12mm

Accepts lines up to 12mm diameter

Sheave Ø mm: 50 Sheave width mm: 15 Rope Ø mm: 12 Break Load kg: 1000 SWL (Kg): 500 Length mm: 79 Fastenings mm: 3 x M6  Weight(g): 114 Important note - foot blocks: Fastenings of the minimum diameter suggested should be used to gain full load capacity

non abrasive gel

Bait tank aeration

SZE 3 RECIRC

West System 206A Slow Hardener 0.2kg Rule Slimline Pumps and Inflator Accepts lines up to 12mm206 Slow Hardener is a low viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five part resin to one part hardener ratio the cured resin hardener mixture yields a rigid high strength moisture resistant solid with excellent bonding and coating properties. Pot Life at 25C: 20 to 30 minutes Cure to a solid state at 21C: 9 to 12